Nelement Electric Solution

Rated for 3A Current: Designed to handle control circuit applications with a current rating of up to 3 Amperes, ideal for low-power operations.

Durable Build Quality: Constructed with high-quality thermoplastic and corrosion-resistant materials, ensuring long-term performance in industrial environments.

Standard 22mm Mounting: Fits universally into 22mm diameter panel cutouts, offering compatibility and easy installation in control panels.

Reliable Contact Mechanism: Offers precise and consistent actuation with snap-action contacts for accurate electrical signaling.

Part of Harmony Series: Belongs to Schneider Electric’s Harmony line, known for modular design, ergonomic operation, and a wide range of compatible accessories and configurations.

2-Position Selector Switch: Features a maintained 2-position (stay-put) operation ideal for ON/OFF or mode selection in control panels.

Robust Build Quality: Made from high-grade plastic and metal components, designed to withstand harsh industrial environments.

Ø22mm Mounting Diameter: Compatible with standard 22mm panel cutouts, ensuring easy integration into existing setups.

IP66 Protection Rating: Offers excellent resistance to dust, water, and oil, making it suitable for demanding industrial applications.

Modular and Expandable Design: Part of Schneider Electric's Harmony XB5 series, allowing compatibility with a wide range of contact blocks and accessories.

Thermal‑magnetic trip unit, C‑curve (single pole, 6 A) – Detects both overloads and short circuits, tripping reliably at 5–10× the rated current—suitable for general lighting, appliance, and motor circuits 

Robust breaking capacities – Rated up to 10 kA at 220–240 V AC (IEC 60947‑2) and 6 kA under IEC 60898‑1 in residential settings; some variants (iC60H) reach 15–20 kA

Compact DIN‑rail design (18 mm wide) – Slim, 2‑pitch module with snap‑on installation, top/bottom screw or tunnel terminals, and padlockable toggle for safe, tool‑free setup .

Enhanced maintenance safety – Features Schneider's VisiTrip fault indication (red flag) and VisiSafe green strip verifying physical contact opening before downstream work 

Durable & eco‑friendly – Withstands up to 20 000 mechanical cycles and 10 000 electrical cycles; includes IP20 terminal protection, meets pollution degree 3, and follows recycled‑packaging standards

Versatile power & energy monitoring – Accurately measures RMS current, phase-to-phase and phase-to-neutral voltage, frequency, power factor, active/reactive/apparent power, energy, unbalance, and even RPM via CT/VT inputs

High-accuracy Class 1 – Certified Class 1 for active energy (IEC 62053‑21) and Class 2 for reactive energy; sampling rate of 32 samples/cycle ensures reliable readings 

Intuitive LED display & load bar – Boasts a three-line, 12-digit red LED display with analog-style load bar, user-selectable favorite pages, status LEDs, and heartbeat/calibration verification 

Robust communications – Onboard RS–485 Modbus RTU port (up to 38.4 kbps) for SCADA/BMS integration; password-protected interface with tamper prevention via secure coding 

Durable, easy.mounting & safety – Panel-mountable (96×96 mm), tool-free clip installation, V‑0 flame-retardant polycarbonate body, IP51 front rating, sourcing dual AC/DC (44–300 V), and CT input flexibility (1 A/5 A) 

2‑Pole, 6 A C‑Curve Protection – Designed to interrupt both live and neutral conductors, this device trips reliably between 5–10× its rated current, ideal for moderate inrush applications like lighting or small motors

High Breaking Capacity (10 kA) – Engineered to stop short-circuit currents up to 10 kA at 230/400 V AC (per IEC 60947‑2 / IEC 60898‑1), safeguarding your distribution board from severe faults 

Thermal‑Magnetic Trip Unit – Provides dual protection: thermal for overloads and magnetic for instantaneous short-circuits, ensuring fast, dependable operation

Compact DIN-Rail Module – A slim, 4-module (4‑pitch) unit with toggle switch, top/bottom Biconnect terminals, and rail-mountability for clean, tool‑free installation

Robust Durability & Safety Features – Rated for 20 000 mechanical and electrical operations, with IP20/40 protection, clear ON/OFF indication, serrated terminals to reduce loose connections and prevent cable pull-out 

9A Rated Contactor: Designed for motor control applications up to 9 Amperes (AC-3), suitable for small motors and lighting circuits.

Single Normally Open (1NO) Auxiliary Contact: Comes with a built-in 1NO auxiliary contact for additional control or signaling functions.

AC Coil Voltage – 220V 50Hz: Operates with a 220V AC control voltage at 50Hz, ensuring compatibility with standard electrical systems.

Robust TeSys E Series Design: Part of Schneider Electric’s TeSys E range, offering reliable performance, compact size, and easy integration.

DIN Rail or Panel Mountable: Flexible mounting options allow for quick installation in electrical panels or enclosures.

Reliable Motor Protection (0.1A to 150A)
Protects motors from overload, phase failure, and unbalanced currents with adjustable thermal trip settings across a wide current range.

Direct Mounting with TeSys Contactors
Easily mounts on TeSys D contactors (e.g., LC1D series), ensuring compact, space-saving integration in motor starters and MCC panels.

Adjustable Trip Class & Manual/Auto Reset
Standard trip class 10A, with selectable manual or automatic reset modes to suit various application and safety requirements.

Built-In Stop Button & Test Function
Includes a front-facing STOP button, trip indicator, and test button to simplify on-site commissioning and troubleshooting.

Conforms to IEC & UL Standards
Certified to IEC 60947-4-1 and UL/CSA standards, offering global reliability in HVAC, pumping, conveyors, and machine tools.